How to setup Natural Stone Veneer
Natural stone veneer can be applied to retaining walls, indoor or outdoor fireplaces, wall facades, and pillars. Thin stone veneers are made from real stone so they resist warping, cracking, fading, and chipping. Additionally, if they do come to be chipped or cracked nobody will observation since, unlike fabricated fake stone veneers, the color and texture of the stone goes all the way through the stone. Stone veneer is also faster and easier to apply since it is lighter and easier to handle.
How to setup Natural Stone Veneer
Natural thin stone veneers come in a wide range of styles and colors to choose from. They are quarried in Arizona, Lannon, Fond Du Lac, Chilton, and Michigan. Thin stone veneer is the ideal stone application since it is superior in terms of being very durable and flexible in matching nearly every style, color, and design. Stone veneers are thinner and lighter than man-made fake stone veneer and fiberglass stones.
The Basics
Stone veneer facility on any exterior needs the same basic methods of application. First there needs to be a moisture barrier, a frame or buildings for the mortar to grip, mortar, and then the stone of your choice. The moisture wall and backbone frame are vital components to ensure that your thin stone veneer will last a lifetime.
When installing stone Veneer to plywood, paneling, wall sheeting, wall board, or other non stone surface:
1. Cover the wall with a moisture wall that is weather defiant and protects the fundamental wood and the back of the stone veneer from moisture damage.
2. Apply a metal lath, mesh, or sheeting with galvanized nails or staples agreeing to your local building code. This supplies rigid keep for the mortar to stick to which provides a firm backbone for your stones to grip.
3. Apply your mortar, and on top of that apply your choice of stone veneer with mortar in in the middle of the "joints."
4. After your mortar has hardened, plainly use a stiff brush and some water to scrape away any mortar that has found its way onto the face of your stones.
Concrete Masonry Stucco
1. As long as the masonry contains no oils, surfactants, or other chemicals on its exterior and is clean and dry then you can feel free to apply the stone veneers without any prep. Just make sure that the backside of the masonry will not be exposed to a water source such has those used for retaining walls, ponds, or organery beds.
2. If it does comprise chemicals or oils plainly etch the exterior with muriatic acid and score with a stiff wire brush.
3. Apply your mortar and your stone as usual.
4. If your exterior has been treated with paint or other chemicals, plainly sand blast this exterior away or consequent directions above and apply a wall material, metal lath, mesh, or sheeting and setup stone as you would for a plywood wall.
Metal Buildings
1. setup paperbacked 3/8 inch wide metal lath to metal cladding supports. Use metal cladding supports of at least 12 to 20 gage and using 1 ¼ inches -12 pancake head super tight screws. Make sure that the screws perforate at least 3.8 inch beyond the inside of the metal exterior and at least every 12 inches.
2. Apply a 1/2 inch to a 3/4 scratch coat of mortar and allow it to dry at least 48 hours.
3. Apply the mortar and setup the stones.
4. After the mortar had been allowed to dry at least 24 hours plainly clean any mortar stains form the face of the stones with a stiff brush and water.
Natural Thin Stone veneers
Natural stone veneers are durable and long lasting. In the long run, real stone is more prudent since it requires nearly zero maintenance, should never need to be replaced under normal conditions, and resists cracking, fading, chipping, erosion, and weather conditions.
Thin stone is available in a wide range of colors and styles because it is made from natural stone. Therefore you can choose from more colors and cuts than fabricated stone.
Halquist Stone, Wisconsin's premier provider of thin stone veneer, offers thin stone veneer that is cut from quarries in Arizona, Wisconsin, and Michigan.
share the Facebook Twitter Like Tweet. Can you share How to setup Natural Stone Veneer.
No comments:
Post a Comment